This manual contains instructions you need to follow for your personal safety and to prevent damage to property. Instructions for your personal safety are highlighted with a red warning icon. Notes on possible damages show up with a yellow alert symbol. Depending on the danger level, the warnings are shown as follows:
Note! indicates that an unintended result or situation can occur if the corresponding information is not heeded. If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. If the warning note warns about personal injury, damage to property may be included in the same warning note in addition.
1.4. Qualified Personnel
PLC reports as well as the associated system may only be set up and operated in conjunction with this documentation. Commissioning and operation must only be performed by qualified personnel. Qualified personnel in the sense of the safety notes in this documentation are persons who are authorized to start up, identify and document machines and systems in accordance with the standards of safety technology.
1.5. Intended Use
Consider the following:
PLC Reports may only be used for the purposes intended in the technical description. The proper and safe operation of the product requires careful configuration, testing, commissioning, operation and maintenance.
All names identified with the ® sign are registered trademarks of SIS Industrial Software GmbH. Other product names used in this publication may be trademarks whose use may infringe upon the rights of the owner.
We have checked the contents of this document to ensure consistency with the software. Nevertheless, deviations to the described software cannot be precluded entirely. The information in this manual is reviewed regularly. Necessary corrections will be included in subsequent editions.